Female adapter to the 22 mm (male) side of a ISO 22 standard filter. Comes with a barbed fitting for vacuum hose. The adapter will also fit a, e.g., TSI 22 mm flow meter.
-
Fully inspected and comes with a certificate.
-
Fully inspected and comes with a certificate.
-
Adapter device to Alberta idealised throat (AIT) inlet. Please specify which device and if Adult or Child size. Pictures show device examples, we can make for all available types. We also have a range of holders of device for hands-free operation during mating with inlet. Please enquire for further information. Material: Blue silicone. Trade Item Number: According to device and AIT type -
A convenient way to introduce a P1 tap to measure the pressure drop over a device according to pharmacopoeia. See example when applied to a waste station.
-
Adapter for mixing inlet and OPC throat.
Material: Stainless steel -
Adapter Respimat for OPC anatomical throat inlet.
Material: Blue silicone. -
Large OPC throat, standard
Material: non-transparent polyamide 12 -
Medium OPC throat, standard
Material: non-transparent polyamide 12 -
Small OPC throat, standard Material: non-transparent polyamide 12 -
Andersen Blank Stage
To achieve an even distribution of a dose from an OINDP on a filter for dissolution testing [1], a blank stage is introduced next to the filter stage on the Andersen impactor. The blank stage (lower part in the picture) fits to the ordinary Andersen stage (upper part in the picture).
1. Sitaram P. Velagaa, Jelena Djuris, Sandra Cvijic, Stavroula Rozou, Paola Russo, Gaia Colombo Alessandra Rossi; European Journal of Pharmaceutical Sciences, ISSN: 0928-0987, Vol: 113, Page: 18-28
-
28.3 and 60 l/min
-
Powder properties is easily measured with an Angle of Repose instrument.
-
Automated Waste Station Turbuhaler/ICORes
can be customised according to your device, the example shown here is for Turbuhaler/ICORes. The station can be made to withdraw doses in different angles, i.e., different orientation of the device, to overcome “memory effects” of reservoir inhalers. Actuation can be by push, pull or as shown here, with a twist. The doses are collected on a high-capacity filter, with a holding capacity of about 10 g. The disposable filter is then safely and easily replaced. The integration with FIA’s TriggerBox III gives the user full control of the flow process and relevant data recorded on file or printer. Can be equipped with anti-static-device. See here for more information.
-
Patient Realistic Inhaler Testing
The F-SIG 6300 by AB FIA is a breathing profile generator that is capable of replaying complex breathing patterns. Thanks to a novel multi-cylinder design F-SIG 6300 enables generation of a number of clinical relevant patterns. F-SIG 6300 is not intended for clinical use on humans. The areas of operation are for instance: Testing of pharmaceutical inhalers and nebulizers with human breathing patterns. Characterization of cigarettes (smokers profiles). Rodent profiles and general respiratory research that includes very controlled breathing patterns.
User Friendly and Versatile
The F-SIG 6300 is operator-friendly and comes with a touch panel. Profiles, possibly recorded by FIA's Metivent software, are handled and modified in a spreadsheet (e.g. Excel) and the profile library is downloaded to the F-SIG 6300. The operator can thereafter, from the library of profiles, select desired profile on the panel and start the replay of the profile.
Application Examples
The equipment is typically placed on the floor, under the table. Above the table the experiment is set up, as shown here an NGI with mixing inlet to simulate patient realistic profiles when measuring APSD. Alternative control and monitoring equipment is also at display, all available from FIA.
Equipment:F-SIG 6300 consists of a breathing profile generator built into a box with transparent plastic covers and placed on wheels. The control system of the multi-cylinder package is configured and operated by the user through the touch panel. Capacity large volume: 0 - 6.3 liters Capacity small volume: 0 - 0.1 liters Voltage: 95 - 255VAC, 50 - 60Hz, 6.5A Dimensions HxWxD: 380x1036x480 mm, Touch Panel: 80x280x170 mm
Download the pdf Patient Realistic Inhaler Testing -
Dose Station Ellipta ®
This is our dedicated delivered dose uniformity test station for Ellipta ®, using the brilliant impinger filter dose collector. The latter is washable in-situ and can be ready for the next dose as part of the wet chemistry work-up procedure. The user works with the equipment in a fixed process which starts by the user placing the device in a nest which mates with the dose collector inlet. Thereafter aided by the station with functions such as dose actuation, solvent delivery, sample agitation and after which the user collects the sample manually. The process is ended with an automated drying procedure. The integration with FIA’s TriggerBox III gives the user full control of the flow process and relevant data recorded on file or printer. Ellipta ® is one of the devices on this product category, we have managed to overcome the challenges of getting a leak-tight fit between the device mouthpiece and the dose collector inlet. The inlet has a very precisely machined geometry which will provide an optimal contact and seal against the device mouthpiece. This principle can also be applied to, e.g., DUSA and adapters for the NGI induction port. Please enquire for more information. See also Turbuhaler ® implementation , but can be made for essentially all devices upon customer request. See also attached flyer for more information for in-depth information.
-
Dose Station Turbuhaler ®
This is our dedicated delivered dose uniformity test station for Turbuhaler ®, using the brilliant impinger filter dose collector. The latter is washable in-situ and can be ready for the next dose as part of the wet chemistry work-up procedure. The user works with the equipment in a fixed process which starts by the user placing the device in an inlet which mates with the dose collector. The inlet is a highly sophisticated construction with an inflatable gasket which seals around the mouthpiece. Above the gasket there are channels which efficiently rinses the gasket and the filter with solvent. The user is aided by the station with functions such as dose actuation, solvent delivery, sample agitation and dose collector cleaning, after which the user collects the sample manually. The process is ended with an automated drying procedure. The integration with FIA’s TriggerBox III gives the user full control of the flow process and relevant data recorded on file or printer. Turbuhaler ® is one of the devices on this product category, see also Ellipta ® implementation, but can be made for essentially all devices upon customer request. See also attached flyer for in-depth information.
-
For pMDI or DPI. As separate units or complete set in box. New or refurbished.
-
Equipment for abbreviated impactor measurement (AIM). For an introduction please read here about our automated concept for AIM (on our company homepage), download AB Fia folder Where the AIM Is Quality Control. The complete FSI consists of a housing, insert and a fine fraction collector with filters. The insert has a 5 micron cut-off at specified flow rate, specify between 30 to 100 L/min at increments of 5. Items are available both refurbished or as new, depending on stock situation. Trade Item Numbers: F5260 FSI Complete: Housing, insert and a fine fraction collector. Specify flow rate for insert L/min. Comes with 2 packs of 50 filters. F5261 Additional insert F5262 fine fraction collector, “filter housing” -
Equipment for abbreviated impactor measurement (AIM). For an introduction please read here about our automated concept for AIM (on our company homepage), download AB Fia folder Where the AIM Is Quality Control. The complete FSI consists of a housing, insert and a fine fraction collector with filters. The insert has a 5 micron cut-off at specified flow rate, specify between 30 to 100 L/min at increments of 5. Items are available both refurbished or as new, depending on stock situation. Trade Item Numbers: F5260 FSI Complete: Housing, insert and a fine fraction collector. Specify flow rate for insert L/min. Comes with 2 packs of 50 filters. F5261 Additional insert F5262 fine fraction collector, “filter housing” -
Equipment for abbreviated impactor measurement (AIM). For an introduction please read here about our automated concept for AIM (on our company homepage), download AB Fia folder Where the AIM Is Quality Control. The complete FSI consists of a housing, insert and a fine fraction collector with filters. The insert has a 5 micron cut-off at specified flow rate, specify between 30 to 100 L/min at increments of 5. Items are available both refurbished or as new, depending on stock situation. Trade Item Numbers: F5260 FSI Complete: Housing, insert and a fine fraction collector. Specify flow rate for insert L/min. Comes with 2 packs of 50 filters. F5261 Additional insert F5262 fine fraction collector, “filter housing” -
We offer most of the common diameters used for inhaler testing in glass fibre quality from renowned Ahlstrom-Munktell.
