Power Supply 24V/2,5A with connector and European power chord type F.
-
Validation kit for IQ / OQ: Certified calipers, calibrated digital thermometer, digital quartz stopwatch.
-
Automatic blasting machine: for jaws.
-
O-rings for cuvettes, 10 pcs.
-
Axis for upper jaw.
-
Net 1000 pcs, extras.
-
Thermostat
-
Dynamometric wrench variable 1 - 5 Nm.
-
Jaws 10 pair, extras
-
Cuvette, extras C1028.
-
Jaws 100 pair, extras
-
Pressure control; More price per cell. Cannot be mounted on standard DRT afterwards, must be ordered with new DRT.
-
HPJ + C. Special equipment for hard chewing gums + counter for control of the amount of mastications. More price per cell.
-
Installed length 500 mm. With offset axes, usable as disturbing tube. Pt 100 Sensor, class EN 60751 1/3B length: 500 mm. With 3 m cable and Lemo plug (4 wire).
-
Duran, 2 necked 100 ml round bottom reaktion vessels, NS 19 center, NS 14 side neck, 10 pcs/cart.
-
Diehm, Disturbing buffle without NS, length 500 mm. complete clamping NS 29. Material PTFE/PVDF. Above dia 22 mm, below dia 18 mm, offset axes, axis distance. about 30 mm. NS tube connection NS 29/32 for tubes Ă 22 mm. Special clamping system for effective clamping.
-
FIA custom OEM 4501 Dual Channel Syringe Pump with Stall Detection,plastic casing, battery powered, simple operation. Stand alone, suitable for field work, designed and programmed to customer specification.
-
Pneumatic dispenser with a fixed volume in the interval of 200 to 500 ml.
-
Pneumatic dispenser with a fixed volume in the interval of 80 to 150 ml.
-
Duran, 2 necked 50 ml round bottom reaktion vessels, NS 19 center, NS 14 side neck, 10 pcs/cart.
-
Duran, 2 necked 25 ml round bottom reaktion vessels, NS 19 center, NS 14 side neck, 10 pcs/cart.
-
Duran, 3 necked 10 liter round bottom reaktion vessels, NS 45 center, NS 29 side necks.
-
Aluminium lined jaws.
-
FIA's chewing apparatus (DRT) is modular, which means that you upon ordering can select how many parallel chewing cells you want and configure the DRT to your needs.
-
For Immersion circulator.
-
Huber immersion circulator, 25-200 °C, 2kW heating effect, accesories available for external connection.
-
FIA's chewing apparatus (DRT) is modular, which means that you upon ordering can select how many parallel chewing cells you want and configure the DRT to your needs.
-
FIA's chewing apparatus (DRT) is modular, which means that you upon ordering can select how many parallel chewing cells you want and configure the DRT to your needs.
-
FIA's chewing apparatus (DRT) is modular, which means that you upon ordering can select how many parallel chewing cells you want and configure the DRT to your needs.
-
Julabo immersion circulator, 20-100 °C, 2kW heating effect.
-
This precisely machined lid temporarily replaces that on the NGI and is used together with the highly versatile flow controller TrBIII Delta
-
The larger volumetric dispensers operate with syringes from FIA. They have volumes up to 1000 ml. It is also possible to obtain the syringes for manual use. Add to quote the desired volume.
-
Key features:
- Can be operated in a series
- Very accurate with a repeatability of 0.04% RSD
- Simplicity in design
- Long life time of dispensing equipment
- Constructed of glass and teflon
- Suitable for integration in robotic systems
- Can be ordered on a mobile platform for best working environment
- Full volume each stroke
- Impact time 10-20 sec
- No PLC nor computer dependent, but can be easily connected
All dispensers require compressed air of 6-8 bar.
-
Key features:
- Can be operated in a series
- Very accurate with a repeatability of 0.04% RSD
- Simplicity in design
- Long life time of dispensing equipment
- Constructed of glass and teflon
- Suitable for integration in robotic systems
- Can be ordered on a mobile platform for best working environment
- Full volume each stroke
- Impact time 10-20 sec
- No PLC nor computer dependent, but can be easily connected
All dispensers require compressed air of 6-8 bar.
-
The Controlled Pump is designed to run 32 different pump programs that are easy selectable by two thumb wheels on the front panel. A program consists of one infusion motion and one withdrawal motion which are both configurable with stroke length and speed.
Start a selected pump program by press of the green âSTART/STOPâ push button at the front panel. The pump will start infuse with parameters from the selected pump program. When the pump reach the programmed end position, it will immediately withdraw and then infuse and so on, as long as the latched push button is in its inner position.
Specifications
Dimensions: 122 x 140 x 350 mm. (WxDxH)
Weight: 4,4 kg.
Power supply: External power supply, 24 VDC 2,5 A
Glass syringe connection for external equipment: Luer Lock
Maximum infusion/withdrawal volume: 20 ml.
Maximum infusion/withdrawal rate (measured directly against atmosphere) 50 ml/s.
Lowest infusion/withdrawal rate (measured directly against atmosphere) 6 ml/s. -
Volumetric dispenser with a programmable volume in the interval of 10 to 1100 ml. The volume may be repeated to pump several liters in portions. This function may be used for instance to repeatedly fill vessels.
On the picture is shown a product version with a stand. It may also be mounted on a stainless lab trolley or with the lower part under a table.
All parts in liquid contact are corrosion resistant, allowing handling of aggressive liquids and solvents. It is also available for dilution purposes with extra valves.
Easy to operate via touch panel. No PC is needed. Just type in the desired volume in ml and the dispenser will withdraw the volume from the container and dispense it from the outlet.
Different liquids will need different withdrawal and infusion (dispensing) speeds which is easily changed through the panel.
Exact dosage of liquid volumes is in the range of < 10 â 1100 ml. The set volume can be repeated, thus it is also possible to dispense for instance 999 x 1100 ml.
Standard deviation less than 0.02.
Volume accuracy and precision: fault < 0.5 ml in the interval 30 â 300 ml and in the interval 300 â 1100 ml < 0.4%.
The concept can be made in other configurations, such as compact models with shorter but broader cylinders, when a slighty less accurate delivery is acceptable. Lower volume ranges, e.g., 500 ml are also available.