Lid to the FIA Chewing Apparatus DRT Models 1-3 temperature regulating waterbath.
-
Lid to the FIA Chewing Apparatus DRT Model 6 temperature regulating waterbath.
-
Liquid Fittings, front/rear for use on the base chamber for thermostated water circulation on FIA Chewing Apparatus DRT.
-
The larger volumetric dispensers operate with syringes from FIA. They have volumes up to 1000 ml. It is also possible to obtain the syringes for manual use. Add to quote the desired volume.
-
Metivent Software - A Companion to TSI Flowmeters
Metivent is a Windows application for recording air flow measurements from TSI flowmeters (e.g. TSI4040). A standard Windows computer with the installed Metivent software connects to the flowmeter via a USB-serial converter. The acquisition of data from the flowmeter is then controlled by the software. Once started the graph is updated continuously during measurement.
- The software can be used in several modes and configurations.
- Start trig (wait to start until the flow has reached the start trigger level)
- End trig (sample data until stop trigger condition)
- Gas calibration
- Number of samples to collect if not using trig
- Standard or volumetric flow
- Sampling rate 1-1000/s
Measurements can be conveniently saved to CSV files and opened in Excel for further data analyses and presentations. The instrument is pivotal when recording inhalations profiles for lung simulation studies (such as F-SIG 6300). The file presents flow and pressure and temperature along with instrument data such as serial number and calibration date and currently used settings.
Download the pdf ABFIA Metivent Software
-
Mixing Inlet - Air-Flow Moderating Inlet (AMI)
The purpose of this product is inhaler testing aimed at achieving greater clinical relevance when testing dry-powder inhalers. Much like traditional mixing inlets, this product allows the user to maintain a constant flow rate into the cascade impactor with any chosen, time-varying flow rate through the DPI itself. We call it the Air-Flow Moderating Inlet (AMI)…a new friend of the inhaler testing community.
-
Mixing inlet flow manifold T-joint. Comes complete with connections for pressurised air and vacuum connection (breath sim) with adapter for ISO 22 exhaust filter. -
Mechanical modifications to the outside of the port w/o compromising pharmacopoeial requirements. To, e.g., facilitate assembly of MP adapters and introduce P1 tap.
-
MPC Immersion Thermostat is a temperature control unit that ideally can be used for temperature control tasks within an internal bath. Temperatures can be easily read via the LED-display screen. An easy keypad (set point, arrow up and arrow down key) is used to enter a set point. The high-performance heating technology, gives a very short heating time. A powerful suction- pressure pump enables ideal circulation with external closed applications. This thermostat uses an over-temperature protection in accordance with DIN EN 61010-2-010, which is independent of the actual control circuits.
-
Fully inspected and comes with a certificate.
-
For nasal administration, expansion chamber as recommended by the FDA for the estimation of the deposition in the respiratory tract. The configuration consists of an expansion chamber (in which the nasal aerosol is generated) assembled to an impactor (e.g. an ACI, NGI, etc.). Three different sizes: 1 L for powder aerosols, 2 L and 5 L for liquid sprays. Comes with a clamp and adapter between glass and NGI. Optionally with a stand for the 5 L chamber. Adapters available for the insertion of the device.