• The NE-4500L includes an extra long chassis on the NE-4500 that will hold and allow 140 mL syringes to open to there full length.
  • The NE-9004C pump is used for higher flow rates & larger dispense volumes. NE-9004C with 2 roller pumping head & 1/4" ID tubing.
    Flow rate ranges: 0.047 mL/min to 1038 mL/min.
    Includes PERI-HEAD-KIT-HGC2.
  • Waterbath to temper the buffer solution in the cuvettes on the FIA Chewing Apparatus. The article includes the bath itself in transparent PVC including the drain tap. Lid with quick connectors and heating immersion circulator are sold separately.

  • The NE-4501 includes all features of the NE-4500 and an optical encoder on the NE-4500 that will detect and stop the motor during a stall.
  • The NE-4501L includes all features of the NE-4500, an extra long chassis and an optical encoder on the NE-4500 that will detect and stop the motor during a stall.
  • SyringeONE

    1,001.00
    Fully programmable; automation capable.
    Operates stand-alone or from a computer.
    Infusion and withdrawal.
    Set a single pumping rate and/or dispensing volume.
    Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer.
    Network, control, and monitor up to 100 pumps with one computer.
    Motor stall detection.
    Dispensing accuracy of +/-1%.
    Holds 1 Syringe from micro-liter sizes up to 60 mL (140 mL partially filled).
    Infusion rates from 0.73 uL/hr (1 mL syringe) to 2100 mL/hr (60 mL syringe).
    Easy-to-use keypad interface.
    One-click program upload from "Pumping Program Generator" spreadsheet.
    Space Saving Chassis: Foot print size of only 14,6 x 22,8 cm.
    Won't take up unnecessary space on your laboratory or production bench.
    Includes all the advanced functions and programming features of the NE-1000 series.
    Disposable, Glass, Stainless Steel Syringes and Plumbing Supplies are sold separately.
  • The High Pressure Jumper plus counter (HPJ+C) is a device that was developed for the mastication of hard chewing gums. The mastication that is performed by the Chewing Machine consists of repeated cycles of the jaws with the movements: PRESS-TWIST-OPEN-REGAIN. When masticating a hard gum, the standard Chewing Apparatus (DRT) may halt at the PRESS movement of the lower jaw. It is halted before it reaches the end position, because it cannot compress the gum further and thus one step in the chewing sequence is never fulfilled. The HPJ-function (High Pressure Jumper function) makes the chewing continue all the same after a short pause (the pause is set to 300 milliseconds). Chewing continues with TWIST - OPEN - REGAIN and PRESS (where it may stop for a while again), until the gum is soft enough for normal chewing without any pauses).

  • SyringeONE:100

    1,167.00
    All the features of the NE-1000.
    Can approximately double the pressure of the NE-1000 Holds 1 Syringe from micro-liter sizes up to 60 mL (140 mL partially filled).
    Infusion rates from 0.73 uL/hr (1 mL syringe) to 2100 mL/hr (60 mL syringe).
    Easy-to-use keypad interface.
    One-click program upload from "Pumping Program Generator" spreadsheet.
    Space Saving Chassis: Foot print size of only 14,6 x 22.8 cm.
    Won't take up unnecessary space on your laboratory or production bench.
    Includes all the advanced functions and programming features of the NE-1000 series.
    Disposable, Glass, Stainless Steel Syringes and Plumbing Supplies are sold separately.
  • Heating immersion circulator for use in the water bath on FIA Chewing Apparatus DRT.

  • SyringeTWO

    1,333.00
    Holds 2 Syringes up to 60 mL each, can be different sizes.
    Infusion rates from 1.436 uL/hr (1 mL syringe) to 7515 mL/hr (60 mL syringe).
    Easy-to-use keypad interface.
    One-click program upload from "Pumping Program Generator" spreadsheet.
    Space Saving Chassis: Foot print size of only 22.9 x 14.61 cm.
    Won't take up unnecessary space on your laboratory or production bench.
    Includes all the advanced functions and programming features of the NE-1000 series.
    Disposable, Glass, Stainless Steel Syringes and Plumbing Supplies are sold separately.
  • The SyringeONE OEM Microfluidic, with Stall Detection is a syringe pump for smooth pumping at ultra-low flow rates. Accepts syringes from the smallest size available up to 60 mL. A 140 mL syringe can be filled up to 120 mL. Pumping rate as low as 0,007 nL/h with a 0,5 μL to 1161 μL/min with a 60 mL syringe. Includes the X Upgrade Smooth Linear/Gradient increasing and decreasing pump feature.

  • Validation kit for IQ / OQ and regular control/validation during operation of FIA Chewing Apparatus DRT. The kit includes: Calibrated Caliper, Calibrated Thermometer and Calibrated Timer.

Go to Top