-
For use with our continuous infusion system or dual infusion systems.
Provides dual check valves for two syringes, withdraw will pull fluid from a reservoir and infusion will output into a separate line.
The kit is pre-assembled - just attach the syringes.
Each dual check valve uses 15 cm. of 1/8" ID tubing connected to a Y connector, one for reservoir and one for output; each Y-connector has 1,5 m. of tubing to make connections to your application. Two 50 mL NormJect Syringes are included. -
Fully programmable; automation capable.
Operates stand-alone or from a computer.
Infusion and withdrawal.
Set a single pumping rate and/or dispensing volume.
Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer.
Network, control, and monitor up to 100 pumps with one computer.
Motor stall detection.
Dispensing accuracy of +/-1%.
Holds 1 Syringe from micro-liter sizes up to 60 mL (140 mL partially filled).
Infusion rates from 0.73 uL/hr (1 mL syringe) to 2100 mL/hr (60 mL syringe).
Easy-to-use keypad interface.
One-click program upload from "Pumping Program Generator" spreadsheet.
Space Saving Chassis: Foot print size of only 14,6 x 22,8 cm.
Won't take up unnecessary space on your laboratory or production bench.
Includes all the advanced functions and programming features of the NE-1000 series.
Disposable, Glass, Stainless Steel Syringes and Plumbing Supplies are sold separately. -
Holds 1 Syringe from micro-liter sizes up to 60 mL. (140 mL partially filled).
Infusion rates from 0.73 uL/hr (1 mL syringe) to 1500 mL/hr (60 mL syringe).
Easy-to-use keypad interface:
Set the syringe diameter, pumping rate, press Start,
Pumps continuously until you stop the pump.
Syringe purge mode:
Power failure mode allows pump to continue pumping after a reset.
Displays total volume dispensed in mL or uL units.
Infusion rate can be changed while pumping.
Selectable infusion rates units: mL/hr, uL/hr, mL/min, uL/min.
Space Saving Chassis: Foot print size of only 5 3/4" x 8 3/4".
Won't take up unnecessary space on your laboratory or production bench.
Remembers previous settings on power up.
Precise reproducible flow rates.
Operates from included 12VDC power supply.
Worldwide power supplies available
Disposable, Glass, Stainless Steel Syringes and Plumbing Supplies are sold separately. Pictured Syringe is for Demonstration purposes only. -
All the features of the NE-1000.
Can approximately double the pressure of the NE-1000 Holds 1 Syringe from micro-liter sizes up to 60 mL (140 mL partially filled).
Infusion rates from 0.73 uL/hr (1 mL syringe) to 2100 mL/hr (60 mL syringe).
Easy-to-use keypad interface.
One-click program upload from "Pumping Program Generator" spreadsheet.
Space Saving Chassis: Foot print size of only 14,6 x 22.8 cm.
Won't take up unnecessary space on your laboratory or production bench.
Includes all the advanced functions and programming features of the NE-1000 series.
Disposable, Glass, Stainless Steel Syringes and Plumbing Supplies are sold separately. -
Includes:
2 pc. 20 mL NormJect Luer Lock Inert
2 pc. 30 mL NormJect Luer Lock Inert
2 pc. 50 mL NormJect Luer Lock Inert
6 pc. Female Luer Barbs 3.2 mm. ID
3 pc. Male Luer Barbs 3.2 mm. ID
20 m. PVC Tubing 3.2 mm. ID x 4.8 mm. OD -
Includes:
2 pc. 1 mL NormJect Luer Slip Inert
2 pc. 3 mL NormJect Luer Lock Inert
2 pc. 5 mL NormJect Luer Lock Inert
2 pc. 10 mL NormJect Luer Lock Inert
6 pc. Female Luer Barbs 3.2 mm. ID
3 pc. Male Luer Barbs 3.2 mm. ID
20 m. PVC Tubing 3.2 mm. ID x 4.8 mm. OD -
SGE PTFE Tipped Plunger Gas Tight Glass Syringes
A PTFE tip plunger minimizes carryover and prevents particulate matter from getting between the plunger and barrel by effectively wiping the barrel inner diameter during the plunger stroke. PTFE tipped plungers are suitable for both liquid and gas samples. Individually boxed. Pistons and barrels are interchangeable.
500uL
Fixed Metal Luer Lock
27.6 bar
70deg-Celcius -
The smoothest microfluidic syringe pump on the market.
Advance Per Step: 4.25 Nanometers.
Holds 1 syringe up to 60 mL (140 mL partially filled).
Infusion rates from 0.008 nL/hr (0.5 uL syringe) to 2545 uL/min (140 mL syringe).
Available in 2 channel version (Model NE-4002X).
Easy-to-use keypad interface.
One-click program upload from "Pumping Program Generator" spreadsheet.
Space Saving Chassis: Foot print size of only 14,6 x 22,8 cm.
Won't take up unnecessary space on your laboratory or production bench.
Dispensing accuracy of +/- 0.5% and reproducibility of +/- 0.2%.
Includes all the advanced functions and programming features of the 1000 Series.
Includes the X Upgrade Smooth Linear/Gradient increasing and decreasing pumping feature.
Disposable, Glass, Stainless Steel Syringes and Plumbing Supplies are sold separately. -
Threaded adapter (female) connecting NGI outlet to 25 mm (male) side of a ISO 22 mm standard filter. Recommended to be combined with this product with barbed fitting to connect to vacuum hose.
-
Inhaler mouthpiece adapter IP red to impactor induction port.
Material: Red silicone (softer and more "forgiving"). FIA also sells impactors and induction ports. -
Kit includes:
Green, 4 roller head, 1,2 m. tubing.
Model Q-TP-PMED-1/16
Pharmed 1/16"ID x 3/16"OD x 1/16" Wall
Clamp ties: Nylon, quantity 4
Reduction coupler, quantity 4
Vial of lubricant. -
Adds an RS-232 serial port to your computer by attaching to a USB port
Includes software driver CD
Attaches to cable CBL-PC-PUMP-7 -
SGE PTFE Tipped Plunger Gas Tight Glass Syringes
A PTFE tip plunger minimizes carryover and prevents particulate matter from getting between the plunger and barrel by effectively wiping the barrel inner diameter during the plunger stroke. PTFE tipped plungers are suitable for both liquid and gas samples. Individually boxed. Pistons and barrels are interchangeable.
50uL
Fixed Metal Luer Lock
27.6 bar
70deg-Celcius -
The NE-9000G pump is for better precision with lower flow rates & small dispense volumes. NE-9000G with 4 roller pumping head & 1/16" ID tubing.
Flow rate ranges: 0.004 mL/min to 75.19 mL/min.
Includes PERI-HEAD-KIT-YG4. -
Computer controllable: networkable up to 100 pumps.
Stand-alone operation: pre-program the pump with a dispensing program, then operate the pump from an attached Foot Switch, button or an I/O controller.
Add the OEM Starter Kit to run as a fully functional, stand-alone pump.
Does not have a built-in user interface.
Chassis mountable: 24.1 x 10.8 x 10.5 cm.
If chassis does not fit in your system, we make custom designed OEM syringe pumps to accommodate your specific needs.
Operates from a 12V DC power source.
Holds 2 syringes, up to 60 mL each. 140 mL with long chassis.
Infusion rates from 1.430 uL/hr (1 mL syringe) to 7515 mL/hr (60 mL syringe).
Includes all the advanced functions and programming features of the NE-1000 family.
Disposable, Glass, Stainless Steel Syringes and Plumbing Supplies are sold separately.
Download our free pump terminal emulator or get a trial version of our Windows based SyringePumpPro.
One-click program upload from "Pumping Program Generator" spreadsheet.
Custom modifications to the mechanics and firmware are also available. -
Inhaler mouthpiece adapter to anatomical throat.
Material: Blue silicone (harder and more durable). -
Take Your Pump Control to the Next Level!
SyringePumpPro enables you to connect multiple pumps to your computer and control them individually or as a group. You can automatically monitor all pump parameters without having to enter any commands. You can configure and control multi-pump protocols, log pump activity and send commands to selected pumps. Get to your results faster.- Constant monitoring of pump parameters
- See pump programs as they execute
- No more re-typing of commands in terminal software
- Send commands to one or many pumps
- Excellent support & service
- OEM Pump? No Keypad? You need SyringePumpPro!
-
Allows full control of pump or other device from a computer
DB-9 adapter connects to 9-pin serial port (25-pin adapters available upon request)
Utilizes the RS-232 communications port of device
Quick and easy setup
Add to basket Details
SGE PTFE Tipped Plunger Gas Tight Glass Syringes
A PTFE tip plunger minimizes carryover and prevents particulate matter from getting between the plunger and barrel by effectively wiping the barrel inner diameter during the plunger stroke. PTFE tipped plungers are suitable for both liquid and gas samples. Individually boxed. Pistons and barrels are interchangeable.
250uL
Fixed Metal Luer Lock
27.6 bar
70deg-Celcius
SGE PTFE Tipped Plunger Gas Tight Glass Syringes
A PTFE tip plunger minimizes carryover and prevents particulate matter from getting between the plunger and barrel by effectively wiping the barrel inner diameter during the plunger stroke. PTFE tipped plungers are suitable for both liquid and gas samples. Individually boxed. Pistons and barrels are interchangeable.
1mL
Fixed Metal Luer Lock
27.6 bar
70deg-Celcius
SGE PTFE Tipped Plunger Gas Tight Glass Syringes
A PTFE tip plunger minimizes carryover and prevents particulate matter from getting between the plunger and barrel by effectively wiping the barrel inner diameter during the plunger stroke. PTFE tipped plungers are suitable for both liquid and gas samples. Individually boxed. Pistons and barrels are interchangeable.
50mL
Removable Luer Lock
7/16 UNEF Metal Thread
6.9 bar
120deg-Celcius
Holds 1 Syringe up to 140 mL. (200 mL partially filled).
Infusion rates from 1.733 uL/hr (1 mL syringe) to 340.6 mL/min (140 mL syringe).
Easy-to-use keypad interface.
One-click program upload from "Pumping Program Generator" spreadsheet.
Space Saving Chassis: Foot print size of only 286 x 156 cm..
Won't take up unnecessary space on your laboratory or production bench.
Includes all the advanced functions and programming features of the NE-1000 series.
Same description and all the features of the DUAL-NE-1000 plus more.
Includes: 2 NE-4000 two channel programmable syringe pumps, synchronization cable and two power supplies.
Holds 4 syringes up to 60 mL.
If you need to create two continuous infusion streams this requires 2 Dual Pump Plumbing Kits for full use of all four channels in the system.
Holds 2 Syringes up to 60 mL each, can be different sizes.
Infusion rates from 1.436 uL/hr (1 mL syringe) to 7515 mL/hr (60 mL syringe).
Easy-to-use keypad interface.
One-click program upload from "Pumping Program Generator" spreadsheet.
Space Saving Chassis: Foot print size of only 22.9 x 14.61 cm.
Won't take up unnecessary space on your laboratory or production bench.
Includes all the advanced functions and programming features of the NE-1000 series.
Disposable, Glass, Stainless Steel Syringes and Plumbing Supplies are sold separately.
