Includes:
2 pc. 1 mL NormJect Luer Slip Inert
2 pc. 3 mL NormJect Luer Lock Inert
2 pc. 5 mL NormJect Luer Lock Inert
2 pc. 10 mL NormJect Luer Lock Inert
6 pc. Female Luer Barbs 3.2 mm. ID
3 pc. Male Luer Barbs 3.2 mm. ID
20 m. PVC Tubing 3.2 mm. ID x 4.8 mm. OD
-
Allows user to interactively communicate to the pump with a computer using RS-232.
Includes: power supply, Pump-to-PC network cable (CBL-PC-PUMP-7) and user manual. -
Foot Switch Package
Start, stop, or send a signal to a pumping program
15 different configurations. Change configurations within a pumping program
20 foot cable
Quick and easy setup
Utilizes the TTL logic port on the pump
Attach to any pump in the NE-1000 or NE-9000 Series for remote operation -
Kit includes:
Clear, 2 roller head, 1,2 m. tubing.
C32Model Q-TP-IND1-1/4
Industrial Grade 1/4"ID x 6/16"OD x 1/16" Wall
Clamp ties: Nylon, quantity 4
Vial of lubricant. -
SGE PTFE Tipped Plunger Gas Tight Glass Syringes
A PTFE tip plunger minimizes carryover and prevents particulate matter from getting between the plunger and barrel by effectively wiping the barrel inner diameter during the plunger stroke. PTFE tipped plungers are suitable for both liquid and gas samples. Individually boxed. Pistons and barrels are interchangeable.
7/16 UNEF Metal Thread
6.9 bar
120deg-Celcius -
SGE PTFE Tipped Plunger Gas Tight Glass Syringes
A PTFE tip plunger minimizes carryover and prevents particulate matter from getting between the plunger and barrel by effectively wiping the barrel inner diameter during the plunger stroke. PTFE tipped plungers are suitable for both liquid and gas samples. Individually boxed. Pistons and barrels are interchangeable.
50mL
Removable Luer Lock
7/16 UNEF Metal Thread
6.9 bar
120deg-Celcius -
SGE PTFE Tipped Plunger Gas Tight Glass Syringes
A PTFE tip plunger minimizes carryover and prevents particulate matter from getting between the plunger and barrel by effectively wiping the barrel inner diameter during the plunger stroke. PTFE tipped plungers are suitable for both liquid and gas samples. Individually boxed. Pistons and barrels are interchangeable.
100uL
Fixed Metal Luer Lock
27.6 bar
70deg-Celcius -
Includes:
2 pc. 20 mL NormJect Luer Lock Inert
2 pc. 30 mL NormJect Luer Lock Inert
2 pc. 50 mL NormJect Luer Lock Inert
6 pc. Female Luer Barbs 3.2 mm. ID
3 pc. Male Luer Barbs 3.2 mm. ID
20 m. PVC Tubing 3.2 mm. ID x 4.8 mm. OD -
For use with our continuous infusion system or dual infusion systems.
Provides dual check valves for two syringes, withdraw will pull fluid from a reservoir and infusion will output into a separate line.
The kit is pre-assembled - just attach the syringes.
Each dual check valve uses 15 cm. of 1/8" ID tubing connected to a Y connector, one for reservoir and one for output; each Y-connector has 1,5 m. of tubing to make connections to your application. Two 50 mL NormJect Syringes are included. -
Power supply and secondary cable only. For use when networking two or more OEM syringe pumps to a single computer serial port. Must use OEM-NET for each additional OEM pump. -
SGE PTFE Tipped Plunger Gas Tight Glass Syringes
A PTFE tip plunger minimizes carryover and prevents particulate matter from getting between the plunger and barrel by effectively wiping the barrel inner diameter during the plunger stroke. PTFE tipped plungers are suitable for both liquid and gas samples. Individually boxed. Pistons and barrels are interchangeable.
10mL
Fixed Metal Luer Lock
13.8 bar
70deg-Celcius -
Computer controllable: networkable up to 100 pumps.
Stand-alone operation: pre-program the pump with a dispensing program, then operate the pump from an attached Foot Switch, button or an I/O controller.
Add the OEM Starter Kit to run as a fully functional, stand-alone pump.
Does not have a built-in user interface.
Chassis mountable: 22.8cm x 14.6cm x 11.4cm.
If chassis does not fit in your system, we make custom designed OEM syringe pumps to accommodate your specific needs.
Operates from a 12V DC power source.
Holds 2 syringes, up to 60 mL each. 140 mL with long chassis.
Infusion rates from 1.430 uL/hr (1 mL syringe) to 7515 mL/hr (60 mL syringe).
Includes all the advanced functions and programming features of the NE-1000 family.
Disposable, Glass, Stainless Steel Syringes and Plumbing Supplies are sold separately.
Download our free pump terminal emulator or get a trial version of our Windows based SyringePumpPro.
One-click program upload from 'Pumping Program Generator' spreadsheet.
Custom modifications to the mechanics and firmware are also available.